Export Packing & Breakage Criteria
Agree bottle protection, carton setup, and breakage assessment before ordering. This guide follows the existing QC checklist covering assembly, decoration, packing, and defect records.
Review Packing During Sampling
Do not confirm a bulk order solely because a sample looks good. Review surface quality, neck finish, accessory fit, decoration, and protective packing together for filling and transport.
Container and Accessory Assembly
Inspect scratches, bubbles, molding marks, and neck finish. Review cap, pump, and dropper fit on samples assembled with the actual container.
Decorated Surfaces
Compare bulk production with the approved sample for logo position, print clarity, color, coating evenness, and metallic adhesion.
Inner Protection and Individual Packing
Review protection against bottle-to-bottle contact and the needs of finished surfaces together. Request individual poly bagging separately if needed.
Carton Setup
Share quantity, destination, and product weight, then review carton setup and stacking and handling conditions. Selecting inner protection alone does not complete packing approval.
Published JeongwooCos Packing Guidance
The existing QC and export article states that bulk poly bag, paper honeycomb, and cushioning can be reviewed as standard packing; individual poly bagging is discussed separately. This does not mean identical packing is automatically applied to every order. Confirm the final specification for the product and shipping conditions.
Define Assessment Conditions Before a Breakage Percentage
The published material does not state a universal export breakage allowance or compensation rate. The following is a pre-order agreement checklist, not a fixed JeongwooCos compensation policy.
- Scope: distinguish broken bottles, chipped openings, and decoration damage; identify dispatch, transit, and receipt inspection points.
- Inspection: document the approved packing sample, transport test conditions, incoming inspection method, and quantity checked.
- Calculation: specify whether the denominator is shipped or inspected quantity. Do not combine figures from different packing or transport conditions.
- Evidence: retain photos, affected quantities, damage location, lot and carton identifiers, and repeat patterns. Agree reporting deadlines, responsibility, and remedy scope separately.
Breakage and packing agreements in the Manufacturer Selection Guide
Send Destination and Packing Requirements Together
Share formula, capacity, accessories, decoration, quantity, schedule, destination, and any special protection needs.
Ask About QC & Export PackingFAQ
Frequently Asked Questions
What export packing guidance has JeongwooCos published?
The existing QC and export article says bulk poly bag, paper honeycomb, and cushioning can be reviewed as standard packing, with individual poly bagging discussed separately. Confirm final packing for the product and shipping conditions.
Is there a fixed breakage allowance or compensation rate?
The published material does not give a universal figure. Agree inspection point, route, quantity, packing approval samples, transport tests, damage evidence, responsibility, and remedy scope before ordering.
What should we record when damage is found?
Retain photos, affected quantity, damage location, lot and carton identifiers, and repeat patterns. Identify the dispatch, transit, or receipt inspection point and the calculation denominator.
